---

THE STREETFLEX®
UNDER THE LED EXTERIOR LAMPS

Flexible in form, color and function - STREETFLEX®, the LED light for your environment.
The Streetflex® is an extremely reliable technical luminaire that the requirements of numerous lighting tasks and at the same time meets the highest design requirements. The technical heart of the lamp is in a housing with geometrically clear form - the basic element.

A design part that can contribute to optimal heat dissipation can be designed according to the customer's requirements and thus fits into the environment

---

Luminaire type

LED up and extension light for mast height and street width up to 10 m
Protection class IP66, protection class I or II

Areas of application:

- Resident streets
- traffic-calmed streets
- collecting streets
- pedestrian zones
- paths in park and green areas
- parking lots

Temperature range:

- ta -40 ° C to + 35 ° C

Light engineering

- Effective LED lens combination
- optional lens optics
- flexible in the radiation characteristic for Street and local lighting LED lifetime:
- LED lifetime: >100,000 h (L80/B10), failure reliability due to LED bypass Colour temperatures*:
- 5000 K (CW), 4000 K (NW), 3000 K (WW), other colour Color rendering index:
- Ra >70, Ra >80 on request)
- Dimming by reducing the power of all LEDs, no partial shutdown
- Light emission 0% in the upper half-space at 0° inclination

Electronic LED control gear

- with thermal monitoring of the LED module and current regulation
- Permissible operating voltage: 220 - 240 V AC, 50/60 Hz
- Power factor: typ.> 0.95
- Constant current operation, LED operating current determined at the factory according to light output
- Control wire for half-night switching, DALI interface
- Surge voltage resistance> 4 kV L / N-GND, up to 10 kV optionally on request
- Service life> 85,000 h (< B10)

Light management

- Night reduction via control wire between 10% and 90% can be set at the factory Autonomous dimming with five independent dimming levels between 10 ... 100%
- Luminous flux tracking (CLO), programmable at the factory
- All functions can be programmed and updated individually via the DALI interface

Casing

- Robust housing made of die-cast aluminum, optionally with additional design part according to customer requirements, Design part fitted as standard from 50 W system power
- Clear cover made of highly transparent PMMA
- No overhead cooling fins, the top is arched for self-cleaning
- Highly weather-resistant powder coating in RAL 9006 or DB 703, special paint on request
- Integrated pressure compensation valve, optimal thermal management through separate modules for LED lamps and control gear, each of which can be changed separately

Dimensions

- Length: 560 mm (without design part)
- Height: 65mm
- Width: 250 mm (without design part)
- Weight: 6.5 kg
- Area exposed to wind: 0.034 m²

Electrical connection

- Connection terminal up to 2.5 mm²
- DALI connection terminal up to 2.5 mm²
- Cable gland as strain relief, suitable for cable diameters from 6 to 12 mm

Mounting

Fastening elements are available in the following variants:
- Variable mast adapter with adjustable angle of inclination, 5 ° steps, spigot dimensions 48/60/76 mm
- Angle of incidence for post top: + 15 ° / -5 °
- Angle of incidence for side entry: + 5 ° / -15 °
- For further information see operating / assembly instructions!

Approval

Approval mark luminaire:
- ENEC 10, VDE, VDE EMC (in preparation)
Certification mark LED control gear:
- ENEC 10, VDE, VDE EMC

LED-System**

Streetflex Typ 1

LED current	Number of LEDs	System performance at 30% operation	System performance at 50% operation	System performance at 70% operation	System performance at 100% operation	Luminaire luminous flux WW / NW / CW
200 mA	20	8 W	10 W	13 W	16 W	1.650 lm
250 mA	20	9 W	12 W	15 W	19 W	2.000 lm
300 mA	20	10 W	13 W	17 W	21 W	2.400 lm
350 mA	20	11 W	15 W	19 W	24 W	2.800 lm
400 mA	20	12 W	16 W	21 W	27 W	3.100 lm
450 mA	20	13 W	18 W	23 W	30 W	3.450 lm
500 mA	20	13 W	19 W	25 W	33 W	3.800 lm

Light distribution