ATTRACTIVE AND INTELLIGENT LUMINAIRE SLIMLIGHT
The discreet, but nevertheless elegant design fits perfectly into any cityscape, thus ensuring high level of acceptance.
The various models within each series Slimlight allow depending on requirements, a wide range of applications.
Through the use of latest LED technology combined with intelligent circuitry concepts for the power reduction, the luminaire series makes
high economic efficiency. & nbsp; & nbsp;
The LED and optics are enclosed with a durable weather-resistant encapsulation and thus hermetically sealed off from all environmental conditions. H5>
Luminaire model
· LED up and Lateral mounted luminaire for mast height and road goes up to 5 to 12 m |
· Degree of protection IP66, protection class I or II |
· Applications: residential streets, traffic-calmed roads, pedestrian zones, bike paths, paths in parks and Green areas, parking lots |
· Temperature range: ta -30°C to +35°C |
Light engineering
· Effective LED lens combination
|
· LED lifetime: | >60.000 h (L80/B10), reliability through LED Bypass
|
· Color temperatures*: | 4000 K (NW) |
· Color rendering index: | Ra >70 (NW)
|
· Dimming by reducing the power of all LED, no partial shutdown)
|
· Light emission: 0% in the upper half space at 0 ° tilt
|
Electronic control device
· Intelligent midnight switching IMSII |
· Constant current mode, LED current set at the factory in accordance with light output |
· With thermal monitoring of the LED module and current reduction |
· voltage surge firmness > 4 kV L / N-GND, up to 10 kV optional on request |
Lightmanagement
Optionally: |
· Phase shutdown: With a shutdown of one phase, the brightness of the luminaire is switchd to a predetermined value
of 20%, 30%, 40% and 50% residual brightness.
|
· Centralized control system:
Each luminaire is equipped with a centralized control interface that can interpret twenty different status commands for controlling the brightness.
The connection of different light sensors / motion detectors is possible. |
Housing
· luminaire lid from corrosion resistant aluminum with large-area connection of the LED modules for optimum heat
transfer (luminaire cover is simultaneously an heatsink)) |
· No overhead cooling fins, cover domed for self cleaning |
· Luminaire by default natural anodised finish aluminum (similar to RAL 9006) |
Dimensions SlimLight 1 & 2: |
Length: | 500 mm |
Height : | 80 mm |
Width: | 160 mm |
Weight: max | 6 kg |
Wind target area: | 0,04 m² |
Dimensions SlimLight 3: |
Length: | 800 mm |
Height : | 80 mm |
Width: | 200 mm |
Weight: max | 10 kg |
Wind target area: | 0,064 m² |
Electrical connection
· Terminals up to 2,5 mm² |
· Cable gland for strain relief, suitable for cable diameters from 6 to 12 mm |
· Rated voltage 230 V ± 10%, AC, 50/60 Hz |
Mounting
By default, with mounting strap
|
· Pole-top 76 mm and mast boom 60 mm |
· Tilt of the Luminaire continuously adjustable, min. 0 ° to 25 °, Standard 8 ° |
· For details, see Installation / Operating Instructions! |
Approbation
Approval marks:
|
· ENEC 5, KEMA KEUR |
LED-System**
SlimLight 1
LED current |
Number of LEDs |
System performance with 100% works |
System performance with 50 % works |
Luminous flux light color CW |
350 mA |
10 |
12 W |
8 W |
1.230 lm |
500 mA |
10 |
17 W |
11 W |
1.640 lm |
700 mA |
10 |
25 W |
15 W |
2.210 lm |
SlimLight 2
LED current |
Number of LEDs |
System performance with 100% works |
System performance with 50 % works |
Luminous flux light color CW |
350 mA |
20 |
23 W |
14 W |
2.480 lm |
500 mA |
20 |
34 W |
19 W |
3.360 lm |
700 mA |
20 |
49 W |
27 W |
4.400 lm |
SlimLight 3
LED current |
Number of LEDs |
System performance with 100% works |
System performance with 50 % works |
Luminous flux light color CW |
350 mA |
40 |
47 W |
25 W |
5.090 lm |
500 mA |
40 |
68 W |
36 W |
2.520 lm |
700 mA |
18 |
42 W |
23 W |
6.650 lm |
** We reserve the right to make technical changes. |
Light distribution
SlimLight 1 / 2 / 3 |
|