" />

Luminaire Caplight

ttl-m2
CLASSIC AND INTELLIGENT luminaire Caplight
Caplights are impressive with their impressive timeless design..
An innovative LED lighting system and various beam angles allow an optimal light distribution.
The different versions of bring efficiency and elegance in the city - on roads, paths and green areas
. By one-sidedness or double-sided assembly with LED, symmetric and asymmetric dispersion are optional possible - with the same design language
. The various radiation thus enabling a targeted darkening of house areas.

Luminaire model

· LED up and Lateral mounted luminaire for mast height and roads up to 5 m
· Degree of protection IP66, protection class I or II
·  Applications: residential streets, traffic-calmed roads, pedestrian zones, bike paths, paths in parks and Green areas, parking lots
· Temperature range: ta -30C to +35C

Light engineering

· Effective LED lens combination, selectively insertable lens optics, flexible in emission characteristic for street and area lighting
· LED lifetime: >60.000 h (L80/B10), reliability through LED Bypass
· Color temperatures*: 4000 K (NW), 3000 K(WW, other color temperatures on request..
· Color rendering index: Ra >70 (NW), Ra >80 (WW)
· Dimming by reducing the power of all LED, no partial shutdown)
· Light emission: 0% in the upper half space at 0 tilt

Electronic control device

· Intelligent midnight switching IMSII
· Constant current mode, LED current set at the factory in accordance with light output
· With thermal monitoring of the LED module and current reduction
· voltage surge firmness > 4 kV L / N-GND, up to 10 kV optional on request

Lightmanagement

Optionally:
· Shutdown phase:
With a shutdown of one phase, the brightness of the luminaire is switchd to a predetermined value of 20%, 30%, 40% and 50% residual brightness.

· Centralized control system:
Each luminaire is equipped with a centralized control interface that can interpret twenty different status commands for controlling the brightness. The connection of different light sensors / motion detectors is possible.

Housing

· luminaire lid from corrosion resistant aluminum with large-area connection of the LED modules for optimum heat transfer (luminaire cover is simultaneously heatsink)
· No overhead cooling fins, cover domed for self cleaning, enhanced edge as protection against vandalism
· Luminaire body made of UV- and weather-resistant transparent PMMA, satin finish lamp body on request
· Luminaire by default anthracite gray (similar RAL 7016), special painting on request
· Pole top element made of steel, galvanized and painted
· Optional incl. Prefabricated connection cable

Dimensions:
Height: 650 mm
Luminaire body: 180 mm
Lid: 700 mm
Weight: 9,5 kg
Wind target area: 0,15 m

Electrical connection

· Terminals up to 2,5 mm
· Cable gland for strain relief, suitable for cable diameters from 6 to 12 mm
· Rated voltage 230 V 10%, AC, 50/60 Hz

Mounting

· Pole top 76mm, other spigot diameter or reducing piece to 60 mm optional
· For details, see Installation / Operating Instructions!

Approbation

Approval marks:
· ENEC 5, KEMA KEUR

LED-System**

CapLight S9 (Asymmetrical)

LED current Number of LEDs System performance with 100% works System performance with 50 % works Luminous flux light color WW Luminous flux light color NW/CW
350 mA 9 10 W 7 W 790 lm 930 lm
500 mA 9 15 W 10 W 1.080 lm 1.270 lm
700 mA 9 21 W 13 W 1.390 lm 1.640 lm

CapLight S18 (Asymmetrical)

LED current Number of LEDs System performance with 100% works System performance with 50 % works Luminous flux light color WW Luminous flux light color NW/CW
350 mA 18 20 W 12 W 1.550 lm 1.830 lm
500 mA 18 30 W 17 W 2.180 lm 2.250 lm
700 mA 18 42 W 23 W 2.750 lm 3.240 lm

CapLight P18 (Symmetrical)

LED current Number of LEDs System performance with 100% works System performance with 50 % works Luminous flux light color WW Luminous flux light color NW/CW
350 mA 18 20 W 12 W 1.550 lm 1.830 lm
500 mA 18 30 W 17 W 2.180 lm 2.520 lm
700 mA 18 42 W 23 W 2.750 lm 3.240 lm
** We reserve the right to make technical changes.

Light distribution

CapLight S9 / S18 CapLight P18