The universal modules 77 as LED conversion kits offer extensive possibilities
for customized modernization of existing lighting systems on
LED technology - from modern to historical lights.
The universal module 77 is as LED conversion kit preferably for lanterns,
Umbrella and bells lamps designed.
It represents a completely prefabricated module which can be connected via its own terminals to the lamp or the power connector and replaced easily.
The LED conversion kits fulfill independently all relevant safety requirements, are designed to protection class IP64 and are made of VDE-certified
electronic components.
Luminaire type
LED conversation kit UM77 2DIM
typical mounting height 3-6m
Enclosure rating IP64, protection class I or II
Application areas
Conversion of existing historic city luminaires in modern, energy-saving LED technology
Preferably suitable for lanterns (Schinkel luminaire) as well as shade and bells luminaires
Predestined applications include residential roads, traffic-calmed streets
Pedestrian areas, paths in parks and green areas, market places etc.
Temperature range: ta -40 ° C to + 35 ° C
Lighting technology
Effective led lens combination, selectively insertable lens optics, flexible in radiation for street and area lighting
LED life:
> 100,000 hours (L80 / B10)
Reliability through LED Bypass
Color temperatures *:
4000 K (NW), 3000 K (WW), 2700 K
other color temperatures on request
Color rendering index:
Ra> 70 (NW, WW), Ra> 80 (2700 K)
Dimming by reducing the power of all the LED, no partial shutdown
* Tolerance deviations of ± 10% We reserve the right
Electronic control unit
with thermal monitoring of the LED module and current reduction
Permissible operating voltage:
220 - 240 V AC, 50/60 Hz control wire for half night switching
Impulse Withstand Voltage> 6 kV L / N-GND, to 10 kV optional on request
Constant current mode, LED current factory set
fully encapsulated electronics block
Light management
Autonomous dimming with two independent dimming levels between 10 ... 100%
0..10V interface for suitable control systems
Luminous flux tracking (CLO), factory programmed
Housing
Tough aluminum and PMMA components
Clear, flat and impact resistant cover made of organic glass
No overhead cooling fins
Hermetic lamps room with integrated pressure equalization valve,
improved thermal management by separate modules for LED lamps and control gear, separately replaceable
Electrical connection
Direct connection of the mast line its own connection box with main terminals, Connection terminal up to 2,5 mm²
Cable gland for strain relief, suitable for cable diameters of 6 to 12 mm
optional incl. pre-assembled connection lead
Assembly
The LED conversion kit is equipped with a uniform mechanical mounting interface. Thus, the module can be used both in its photometric emission direction,
as well as for various types of lamps equally.
The assembly in the luminaire take place by simple
Accessories such as an intermediate mounting plate that precisely the mechanical installation situation at the luminaire adapts.
Furthermore, it is possible to connect the main supplys through a prefabricated wiring harness. This makes it possible to replace the entire
existing electrical kit to the LED system.
The direct connectivity of the power line and a few mechanical fittings, makes the installation remaining really minimal.
Approbations
approval mark:
LED control gear:
ENEC 15
LED module:
VDE
connector box:
VDE, KEMA-KEUR
Production locations technologically certified by:
ISO 9001: 2008
ISO / TS 16949: 2009
VDE-monitoring by:
ECS / CIG 021-024
LED-System**
Street optics
LED current
Number of LED
System performance at 50% operation
System performance at 100% operation
Luminous flux Light color 2700K K
Luminous flux Light color NW/WW
200 mA
24
12 W
18 W
1.700 lm
2.150 lm
250 mA
24
13 W
21 W
2.100 lm
2.650 lm
300 mA
24
15 W
25 W
2.200 lm
2.800 lm
350 mA
24
17 W
28 W
2.550 lm
3.250 lm
400 mA
24
17 W
32 W
2.850 lm
3.600 lm
450 mA
24
20 W
35 W
3.150 lm
4.000 lm
500 mA
24
22 W
39 W
3.500 lm
4.450 lm
550 mA
24
24 W
42 W
3.800 lm
4.800 lm
600 mA
24
25 W
46 W
4.100 lm
5.200 lm
650 mA
24
27 W
49 W
4.400 lm
5.500 lm
Parking slot optics
LED current
Number of LED
System performance at 50% operation
System performance at 100% operation
Luminous flux Light color 2700K K
Luminous flux Light color NW/WW
200 mA
24
12 W
18 W
1.700 lm
2.150 lm
250 mA
24
13 W
21 W
2.100 lm
2.650 lm
300 mA
24
15 W
25 W
2.500 lm
3.150 lm
350 mA
24
17 W
28 W
2.900 lm
3.650 lm
400 mA
24
17 W
32 W
3.200 lm
4.100 lm
450 mA
24
20 W
35 W
3.550 lm
4.500 lm
500 mA
24
22 W
39 W
3.950 lm
5.000 lm
550 mA
24
24 W
42 W
4.300 lm
5.400 lm
600 mA
24
25 W
46 W
4.600 lm
5.850 lm
650 mA
24
27 W
49 W
4.950 lm
6.250 lm
Light distribution
Light distribution Conversation Kit 77 S
Light distribution Conversation Kit 77 P
Accessories
Intermediate mounting plate
Intermediate mounting aluminum sheet tailored to the geometry of the constituent luminaire inserted nuts for mounting the conversion kit,
nature aluminum or in in RAL powder coated
Mast cable, length 5.0 m with IP68 connector
Mast cable, length 8.0 m with IP68 connector
Connecting cable, length 0.3 m with IP68 connector
Connecting lead, length 12.0 m
Other cable lengths on request
Covering hoods
Domecover made of PMMA for bells lights
incl. sealing and ventilation element with mosquito repellent
Dome diameter on request
HARMONY BETWEEN HISTORY AND MODERNITY
LED CONVERSION KIT UM77 HPS
The universal modules 77 as LED conversion kits offer extensive possibilities
for customized modernization of existing lighting systems on
LED technology - from modern to historical lights.
The universal module 77 is as LED conversion kit preferably for lanterns,
Umbrella and bells lamps designed.
It represents a completely prefabricated module which can be connected via its own terminals to the lamp or the power connector and replaced easily.
The LED conversion kits fulfill independently all relevant safety requirements, are designed to protection class IP64 and are made of VDE-certified
electronic components.
Luminaire type
LED conversation kit UM77 HPS
typical mounting height 3-6m
Enclosure rating IP64, protection class I or II
Application areas
Conversion of existing historic city luminaires in modern, energy-saving LED technology
Preferably suitable for lanterns (Schinkel luminaire) as well as shade and bells luminaires
Predestined applications include residential roads, traffic-calmed streets
Pedestrian areas, paths in parks and green areas, market places etc.
Temperature range: ta -40 ° C to + 35 ° C
Lighting technology
Effective led lens combination, selectively insertable lens optics, flexible in radiation for street and area lighting
LED life:
> 100,000 hours (L80 / B10)
Reliability through LED Bypass
Color temperatures *:
4000 K (NW), 3000 K (WW), 2700 K
other color temperatures on request
Color rendering index:
Ra> 70 (NW, WW), Ra> 80 (2700 K)
Dimming by reducing the power of all the LED, no partial shutdown
* Tolerance deviations of ± 10% We reserve the right
Electronic control unit
with thermal monitoring of the LED module and current reduction
Permissible operating voltage:
220 - 240 V AC, 50/60 Hz control wire for half night switching
Impulse Withstand Voltage> 6 kV L / N-GND, to 10 kV optional on request
Constant current mode, LED current factory set
fully encapsulated electronics block
Light management
Autonomous dimming with two independent dimming levels between 10 ... 100%
0..10V interface for suitable control systems
Luminous flux tracking (CLO), factory programmed
Housing
Tough aluminum and PMMA components
Clear, flat and impact resistant cover made of organic glass
No overhead cooling fins
Hermetic lamps room with integrated pressure equalization valve,
improved thermal management by separate modules for LED lamps and control gear, separately replaceable
Electrical connection
Direct connection of the mast line its own connection box with main terminals, Connection terminal up to 2,5 mm²
Cable gland for strain relief, suitable for cable diameters of 6 to 12 mm
optional incl. pre-assembled connection lead
Assembly
The LED conversion kit is equipped with a uniform mechanical mounting interface. Thus, the module can be used both in its photometric emission direction,
as well as for various types of lamps equally.
The assembly in the luminaire take place by simple
Accessories such as an intermediate mounting plate that precisely the mechanical installation situation at the luminaire adapts.
Furthermore, it is possible to connect the main supplys through a prefabricated wiring harness. This makes it possible to replace the entire
existing electrical kit to the LED system.
The direct connectivity of the power line and a few mechanical fittings, makes the installation remaining really minimal.
Approbations
approval mark:
LED control gear:
ENEC 15
LED module:
VDE
connector box:
VDE, KEMA-KEUR
Production locations technologically certified by:
ISO 9001: 2008
ISO / TS 16949: 2009
VDE-monitoring by:
ECS / CIG 021-024
LED-System**
Street optics
LED current
Number of LED
System performance at 50% operation
System performance at 100% operation
Luminous flux Light color 2700K K
Luminous flux Light color NW/WW
370 mA
16
13 W
21 W
1.800 lm
2.300 lm
370 mA
24
17 W
29 W
2.750 lm
3.450 lm
Parking slot optics
LED current
Number of LED
System performance at 50% operation
System performance at 100% operation
Luminous flux Light color 2700K K
Luminous flux Light color NW/WW
370 mA
16
12 W
21 W
2.050 lm
2.600 lm
370 mA
24
13 W
29 W
3.050 lm
3.900 lm
Light distribution
Light distribution Conversation Kit 77 S
Light distribution Conversation Kit 77 P
Accessories
Intermediate mounting plate
Intermediate mounting aluminum sheet tailored to the geometry of the constituent luminaire inserted nuts for mounting the conversion kit,
nature aluminum or in in RAL powder coated
Mast cable, length 5.0 m with IP68 connector
Mast cable, length 8.0 m with IP68 connector
Connecting cable, length 0.3 m with IP68 connector
Connecting lead, length 12.0 m
Other cable lengths on request
Covering hoods
Domecover made of PMMA for bells lights
incl. sealing and ventilation element with mosquito repellent
Dome diameter on request